A Review on Effect of Fluid Flow and Heat Transfer in Various Types of Cavities or Enclosed Object

Authors

  • Shivam Burman Research Scholar, Department of Mechanical Engineering, Corporate Institute Of Science & Technology, Bhopal
  • Lakshmi Yadav Assistant Professor, Department of Mechanical Engineering, Corporate Institute Of Science &Technology, Bhopal
  • B. Suresh HOD Department of Mechanical Engineering Corporate Institute of Science and Technology Bhopal

Keywords:

Newtonian Fluid, Novel Cavity, Heat Transfer, Heated Circular Obstacle, Hydrodynamics Forces

Abstract

This study is a systematic review of research on heat transfer analysis in cavities, and it seeks to provide a comprehensive understanding of flow and heat transfer performance in different types of cavities with different types of heated ribs in the presence of an obstruction. The study also investigates the effects of various forces, such as drag and lift force in obstacles, as well as the thermophoresis effect on heat transfer in Fluid by heated ribs. This study also concentrates on a variety of fluids, including air, water, Newtonian and Non-Newtonian fluids, in cavities. In addition, only single-phase flow and heat transfer phenomena are covered in this review. It discusses the various validation techniques utilized in numerical studies and the various lattice types and sizes utilized by researchers. This study is a comprehensive review of a small number of research articles, the majority of which have been published since 2013, covering the most recent advancements in the field of heat transmission analysis in cavities. This study's review of the relevant literature demonstrates that cavities with impediments such as fins and rotating cylinders have a significant impact on enhancing heat transfer. In addition, it has been discovered that the use of Newtonian, Non-Newtonian, nanofluids, and hybrid nanofluids has a greater impact on enhancing heat transfer. The study concludes by proposing prospective directions for research in the field of fluid heat transfer.

 

References

[1] A. Malleswaran and S. Sivasankaran, "A Numerical simulation on MHD mixed convection in a lid-driven cavity with corner heaters," J. Appl. Fluid Mech., vol. 9, no. 1, pp. 311-319, 2016, https://doi.org/10.18869/acadpub.jafm.68.224.22903

[2] I. Zahan, R. Nasrin, and M. A. Alim, "Mixed convective hybrid nanofluid flow in lid-driven undulated cavity: Effect of MHD and joule heating," J. Nav. Archit. Mar. Eng., vol. 16, no. 2, pp. 109-126, 2019, https://doi.org/10.3329/jname.v16i2.40585

[3] A. Gaetano, S. A. Zavattoni, M. C. Barbato, P. Good, G. Ambrosetti, and A. Pedretti, "Design Optimization of a Novel Receiving Cavity for Concentrated Solar Power Applications by Means of 3D CFD Simulations," Energy Procedia, vol. 69, pp. 379-387, 2015, https://doi.org/10.1016/j.egypro.2015.03.044

[4] Y. Tang, L. Luo, P. Zhang, and M. Ma, "Effect of rear wall inclination on cavity acoustic characteristics at high Mach numbers," J. Phys. Conf. Ser., vol. 2252, no. 1, 2022, https://doi.org/10.1088/1742-6596/2252/1/012007

[5] M. K. Raihan et al., "Flow of non-newtonian fluids in a single-cavity microchannel," Micromachines, vol. 12, no. 7, 2021, https://doi.org/10.3390/mi12070836

[6] Y. Khan et al., "Numerical Computations of Non-Newtonian Fluid Flow in Hexagonal Cavity with a Square Obstacle: A Hybrid Mesh-Based Study," Front. Phys., vol. 10, no. May, pp. 1-14, 2022, https://doi.org/10.3389/fphy.2022.891163

[7] P. Sikdar and S. M. Dash, "A numerical study on the lid-driven cavity with power-law fluids at different moving lengths of the top lid," CFD Lett., vol. 12, no. 6, pp. 107-117, 2020, https://doi.org/10.37934/cfdl.12.6.107117

[8] N. Fatima, N. Kousar, K. U. Rehman, and W. Shatanawi, "Magneto-thermal convection in partially heated novel cavity with multiple heaters at bottom wall: A numerical solution," Case Stud. Therm. Eng., vol. 43, no. December 2022, p. 102781, 2023, https://doi.org/10.1016/j.csite.2023.102781

[9] G. Saha, A. A. Y. Al-Waaly, M. C. Paul, and S. C. Saha, "Heat Transfer in Cavities: Configurative Systematic Review," Energies, vol. 16, no. 5, 2023, https://doi.org/10.3390/en16052338

[10] S. Bilal, N. Z. Khan, I. A. Shah, J. Awrejcewicz, A. Akgül, and M. B. Riaz, "Heat and flow control in cavity with cold circular cylinder placed in non-newtonian fluid by performing finite element simulations," Coatings, vol. 12, no. 1, pp. 1-19, 2022, https://doi.org/10.3390/coatings12010016

[11] A. D. Hobiny and I. Abbas, "The impacts of variable thermal conductivity in a semiconducting medium using finite element method," Case Stud. Therm. Eng., vol. 31, no. January, p. 101773, 2022, https://doi.org/10.1016/j.csite.2022.101773

[12] Y. Meng, W. Sun, H. Gu, F. Chen, and R. Zhou, "Supersonic Combustion Mode Analysis of a Cavity Based Scramjet," Aerospace, vol. 9, no. 12, 2022, https://doi.org/10.3390/aerospace9120826

[13] K. U. Rehman, N. Fatima, N. Kousar, and W. Shatanawi, "Modelling of thermal energy individualities in novel enclosure with uniformly heated circular obstacle and multi-shaped heated ribs," Case Stud. Therm. Eng., vol. 34, no. April, p. 102014, 2022, https://doi.org/10.1016/j.csite.2022.102014

[14] S. O. Giwa, M. Sharifpur, M. H. Ahmadi, and J. P. Meyer, A review of magnetic field influence on natural convection heat transfer performance of nanofluids in square cavities, vol. 145, no. 5. Springer International Publishing, 2021. https://doi.org/10.1007/s10973-020-09832-3

[15] L. Singh, G. Kumar, S. Jain, and B. Kumar Kaushik, "A novel plus shaped cavity based optical fiber sensor for the detection of Escherichia-Coli," Results Opt., vol. 5, no. September, p. 100156, 2021, https://doi.org/10.1016/j.rio.2021.100156

[16] H. Feng, W. Huang, C. Tang, and D. Li, "Design of a novel bimodal cavity," Rev. Sci. Instrum., vol. 91, no. 6, 2020, https://doi.org/10.1063/5.0008027

[17] B. P. Geridonmez and H. F. Oztop, "MHD natural convection in a cavity in the presence of cross partial magnetic fields and Al2O3-water nanofluid," Comput. Math. with Appl., vol. 80, no. 12, pp. 2796-2810, 2020, https://doi.org/10.1016/j.camwa.2020.10.003

Downloads

Published

04-09-2023

Issue

Vol 2 Issue 3 (Jul- Sep 2023)

Section

Articles

License

Copyright (c) 2023 Shivam Burman, Lakshmi Yadav, B. Suresh

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Re-users must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. This license allows for redistribution, commercial and non-commercial, as long as the original work is properly credited.

How to Cite

[1]
Shivam Burman et al. 2023. A Review on Effect of Fluid Flow and Heat Transfer in Various Types of Cavities or Enclosed Object. International Journal of Innovations in Science, Engineering And Management. 2, 3 (Sep. 2023), 80–84.