CFD Analysis of the Effects of Fin Geometry and Fluid Velocity on the Performance of a Double-Pipe Heat Exchanger

Modassir Ahmad; Piyush Kumar Verma

doi:10.69968/ijisem.2026v5i4168-185

Authors

Modassir Ahmad Research Scholar, Department of Mechanical Engineering, Corporate Institute of Science & Technology, Bhopal
Piyush Kumar Verma Assistant Professor, Department of Mechanical Engineering, Corporate Institute of Science & Technology, Bhopal

DOI:

https://doi.org/10.69968/ijisem.2026v5i4168-185

Keywords:

Double-Pipe Heat Exchanger, Twisted-Fin Inserts, Heat Transfer Enhancement, Computational Fluid Dynamics (CFD), Nusselt Number

Abstract

Double-pipe heat exchangers are widely used in thermal systems, where improving heat transfer while controlling pressure losses is an important design consideration. The present study investigates the thermal and hydraulic performance of a double-pipe heat exchanger equipped with twisted-fin inserts. The objective was to examine the influence of fin geometry and hot- and cold-fluid velocity variation on heat-transfer performance. Three-dimensional CFD simulations were performed using CATIA V5 for geometry development and ANSYS Fluent 2023 for numerical analysis, with distilled water as the working fluid. The performance was evaluated using outlet temperature, pressure drop, friction factor, heat-transfer rate, convective heat-transfer coefficient, and Nusselt number. Among the investigated fin geometries, Case 4 provided the most suitable geometry, while Case 4.1 produced the highest heat-transfer rate, convective heat-transfer coefficient, and Nusselt number, with values of 2191.85 W, 2207.95, and 84.02, respectively. Case 4.5 provided the highest outlet temperatures. The study demonstrates that twisted-fin geometry and flow conditions strongly influence heat-transfer performance. Future work can investigate nanofluids, alternative tube materials, and other fin geometries to further enhance performance.

References

Ali, S., Dbouk, T., Wang, G., Wang, D., & Drikakis, D. (2023). Advancing thermal performance through vortex generators morphing. Scientific Reports, 13(368), 1–14. https://doi.org/10.1038/s41598-022-25516-4

Aridi, R., Ali, S., Lemenand, T., Faraj, J., & Khaled, M. (2022). CFD analysis on the spatial effect of vortex generators in concentric tube heat exchangers – A comparative study. International Journal of Thermofluids, 16, 100247. https://doi.org/10.1016/j.ijft.2022.100247

Arjmandi, H., Amiri, P., & Saffari Pour, M. (2020). Geometric Optimization of a Double Pipe Heat Exchanger with Combined Vortex Generator and Twisted Tape: A CFD and Response Surface Methodology (RSM) Study. Thermal Science and Engineering Progress, 18, 100514. https://doi.org/10.1016/j.tsep.2020.100514

Bhattacherjee, D. (2020). CFD Analysis of Double Pipe Counter Flow Heat Exchanger. International Journal of Engineering Research & Technology, 9(10).

Chaudhari, N. R., & Adroja, F. N. (2014). A Review on Design & Analysis of Double Pipe Heat Exchanger. International Journal of Engineering Research & Technology, 3(2), 2502–2505.

Dandoutiya, B. K., & Kumar, A. (2023). Study of thermal performance of double pipe heat exchanger using W-cut twisted tape. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 45(2), 5221–5238. https://doi.org/10.1080/15567036.2023.2207497

El Hassan, M., Al Rajeh, A. Y., Bukharin, N., Alghannam, Y., & Albakawi, J. (2025). Performance Enhancement of Convective Heat Transfer in Double Pipe Heat Exchangers using Different Vortex Generators’ Configurations. E3S Web of Conferences, 647. https://doi.org/10.1051/e3sconf/202564702002

Gabir, M. M., & Alkhafaji, D. (2021). Comprehensive Review on Double Pipe Heat Exchanger Techniques. Journal of Physics: Conference Series, 1973. https://doi.org/10.1088/1742-6596/1973/1/012013

Hameed, V. M., & Awad, S. M. (2021). Effect of fluid velocity on the heat transfer rate of double pipe heat exchanger. International Journal of Multidisciplinary Sciences and Advanced Technology, 2(1), 1–9. http://www.ijmsat.com

Haw, W., Oon, C. S., & Lau, E. Von. (2025). Thermal-Hydraulic and Hydrodynamic Analysis of Twisted Fins in a Double-Pipe Heat Exchanger Willy. Results in Engineering, 26(March). https://doi.org/10.1016/j.rineng.2025.104642

Kadhim, S. A., Rasheed, R. H., Hammoodi, K. A., Ashour, A. M., Rashid, F. L., Saeed, M. M. A., Bouabidi, A., Shoeibi, S., Aich, W., & Hasan, M. M. (2025). Enhancing the thermal performance of double-pipe heat exchangers using wire coil inserts: A focused review. Scientific African, 29, e02896. https://doi.org/10.1016/j.sciaf.2025.e02896

Kotian, S., Methekar, N., Jain, N., & Naik, P. (2020). Heat Transfer and Fluid Flow in a Double Pipe Heat Exchanger, Part I: Experimental Investigation. Asian Review of Mechanical Engineering, 9(2).

Kumbhar, S. S., Patil, P. U. N., Patil, Y. P., Shelake, A. A., Dhere, K. T., & Shinde, P. N. (2023). Cfd Analysis of Double Pipe Heat Exchanger. International Research Journal of Modernization in Engineering Technology and Science, 05(06), 123–127. https://doi.org/10.56726/irjmets41354

Lavakumar, M., Reddy, B. V., & Reddy, K. H. (2024). Enhancement of Heat Transfer rate using Axially Interrupted Rectangular Fins in Double Pipe Heat Exchanger. International Research Journal of Multidisciplinary Technovation, 6(6).

Navindgi, M. C. (2018). Heat Transfer Enhancement of Heat Exchanger Using Vortex Generators. 4(7).

Omidi, M., Farhadi, M., & Jafari, M. (2017). A comprehensive review on double pipe heat exchangers. Applied Thermal Engineering, 110, 1075–1090. https://doi.org/https://doi.org/10.1016/j.applthermaleng.2016.09.027

Rai, V. G., & Muchrikar, A. (2021). CFD analysis of double pipe counter flow heat exchanger subjected to varying cold fluid velocity in flat inner pipe. International Journal of Engineering Development and Research, 9(4), 37–43.

Rifqi, A. M., & Al-Khalil, Y. (2025). Thermal Performance Analysis of Heat Exchanger Using Computational Fluid Dynamics. RESWARA: Jurnal Riset Ilmu Teknik, 3(2), 60–68. https://doi.org/10.70716/reswara.v3i2.416

Rostami, S., & Ahmadi, N. (2025). In the Study of the Effects of the Pipe Design of a Heat Exchanger on the Thermo-Fluid Characteristics and Exergy Destruction. Processes, 13(835).

Savas¸ Evran, & Kurt, M. (2023). CFD and statistical analysis of flow mass ratios on temperature and pressure drops of double pipe heat exchanger. International Journal of Low-Carbon Technologies, 18.

Singh, S. K., Chauhan, M. K., & Shukla, A. K. (2022). Heat transfer enhancement in double-pipe heat exchanger: A review. Journal of Physics: Conference Series, 2178. https://doi.org/10.1088/1742-6596/2178/1/012007

Talakonda, Y., Jayachandraiah, B., & Reddy, B. (2019). Performance Enhancement of Double Pipe Heat Exchanger with Helical Fin and Vortex Generator using CFD. International Journal of Engineering and Advanced Technology, 9, 2677–2681. https://doi.org/10.35940/ijeat.B4058.129219

Usmani, A. A., Shrivastava, P., & Singh, S. (2025). Impacts of Fins on The Heat Transfer Characteristics in A Shell and Cone-Shaped Coil Heat Exchanger. International Journal of Innovations In Science Engineering And Management, 4(1). https://doi.org/10.69968/ijisem.2025v4i1106-117